Pricing (Tuesday, 05-Dec-2006 01:44:07 AEDT)
$60/daily
Mains powered, portable audio mixer.
Equipment features
Number |
Details |
8 |
Input channels with:
- Low impedence (XLR connectors,
phantom powerable), or higher impedence (6.5 mm
TRS connectors)
balanced audio inputs
- Variable -60dB to -20dB input gain, with -20dB attenuator
switch
- Pre-fader channel output and re-insert (unbalanced
6.5 mm TRS connector
split for input and output on same connector)
- One pre-fader & pre-equalisation, variable gain, aux
send
- Two post-fader, variable, gain aux sends
- Latching pre-fade monitor switch with metering (matches
-10dB points for channel and master faders)
- Treble, adjustable-frequency mid-range, & bass equaliser
controls
- Master fader and stereo pan controls
- Clipping indicator
- Can supply 48 Volts DC phantom power
to the XLR channel input
connectors. This is switchable to apply it to all inputs or
none, with just one switch. Because it's often
inappropriate to apply phantom power to many sources, it has been
modified so that it only supplies phantom power to the last
channel, but this modification is easily undoable.
|
1 |
Unbalanced, fixed-level, input for each of the three aux buses
(single unbalanced 6.5 mm TRS connectors, one for each bus) |
1 |
Unbalanced, fixed-level, inputs to the main stereo buses (two
unbalanced 6.5 mm TRS
connectors, one for each channel) |
2 |
Unbalanced, adjustable-level, inputs to the main (left &
right) buses (two unbalanced 6.5 mm TRS connectors, one for each bus) |
2 |
Balanced main (left and right) outputs (XLR connectors) |
3 |
Unbalanced aux send outputs (unbalanced 6.5 mm
TRS connectors) |
1 |
Unbalanced, adjustable-level, headphone monitor socket for the
pre-fade-listen bus (one unbalanced 6.5 mm stereo
TRS connectors, on the front panel) |
2 |
Master faders for the main out channels (one each for left and
right) |
3 |
Master faders for the three aux send channels |